Molybdenum foil

Molybdenum foil is one of the molybdenum products. It is through the powder metallurgy of molybdenum plate, after mechanical processing of 0.2mm flat rolling molybdenum, that is, molybdenum foil, its minimum purity of 99.9%. The processing of molybdenum foil is mainly to obtain the corresponding mechanical properties. The main processing processes include bending, spinning, drawing, stamping, etc., so that it can be used under high temperature and low temperature conditions. It is roughly the same as the nature of the molybdenum plate. Xiamen China Tungsten Online Technology Co., Ltd. can produce molybdenum foils of different shapes and types according to the thickness, surface conditions and tolerances required by customers. Molybdenum foil is widely used in electronics, electrical components, tensile products, furnace insulation and corrosion-resistant products.

Classification:

Plate

E-mail:

monfils.chen@mtwkj.com

Contact

Message

introduce

Product Introduction

Generally, the thickness of molybdenum foil is between 0.01 and 0.03mm. The 0.025 molybdenum foil prepared by our company has the advantages of low temperature resistance, continuous surface, smooth edge, good surface texture, high clamping force, high strength, low cost and high efficiency.

The surface of the product presents a smooth metallic color, without cracks, folding, peeling, penetrating pinholes, metal or non-metal pressure-in defects, allowing local minor scratches and roller marks, and lubricating oil and cleaning traces. The surface of the annealed product will have slight scratches and wrinkles.

Molybdenum foil is generally delivered in rolls, wrapped in soft paper or plastic film on the mandrel. Molybdenum foil that is not delivered in rolls is wrapped in soft paper or plastic film on each layer, each stack is clamped and tied tightly with cardboard, and then packed in cartons. In the carton to be placed in the lining of moisture-proof paper, and foam or soft paper to fill, plug tight, to prevent items from moving. In addition, the outside of the carton to indicate moisture-proof, light and other words.

Product Parameters

Brand	Variety	Status	Thickness x width x length/mm
Mo1	Foil	Cold Rolling (Y) Annealing (m)	(0.01 ~ 0.03) ×(50 ~ 120) ×(≥ 200) (>0.03 ~<0.13) ×(50 ~ 240) ×(≥ 200)
Mo2
MoLa

Brand	Variety	Status	Thickness x width x length/mm
Mo1	Foil	Cold Rolling (Y) Annealing (m)	(0.01 ~ 0.03) ×(50 ~ 120) ×(≥ 200) (>0.03 ~<0.13) ×(50 ~ 240) ×(≥ 200)
Mo2
MoLa

Brand	Mo	Impurity content, not more
	Mo	Al	Ca	Fe	Mg	Ni	Si	C	N	O	La2O3
Mo1	Allowance	0.002	0.002	0.010	0.002	0.005	0.01	0.01	0.003	0.008	-
Mo2	Allowance	0.005	0.004	0.015	0.005	0.005	0.01	0.02	0.003	0.020	-
MoLa	Allowance	0.002	0.002	0.015	0.005	0.005	0.01	0.02	0.005	-	0.1~1.8
Note: The O content of MoLa brand can be tested according to customer requirements.